Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Seat Belt
Model Year: 2008 Model: Sequoia Doc ID: RM000003H4S000X
Title: SEAT BELT: REAR NO. 2 SEAT OUTER BELT ASSEMBLY: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for the LH side and RH side.
  • The procedure listed below is for the RH side.

1. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH

(a) Remove the curtain shield airbag assembly SUPPLEMENTAL RESTRAINT SYSTEMS: CURTAIN SHIELD AIRBAG ASSEMBLY: REMOVAL (2008 Sequoia) .

2. REMOVE POWER BACK DOOR ROD (w/ Power Back Door) DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

3. REMOVE POWER BACK DOOR UNIT ASSEMBLY (w/ Power Back Door) DOOR / HATCH: POWER BACK DOOR DRIVE UNIT: REMOVAL (2008 Sequoia)+

4. REMOVE QUARTER TRIM BRACKET RH (for RH Side) HEATING / AIR CONDITIONING: REAR AIR CONDITIONING UNIT: REMOVAL (2008 Sequoia)+

5. REMOVE COVER SUB-ASSEMBLY (for RH Side) HEATING / AIR CONDITIONING: REAR AIR CONDITIONING UNIT: REMOVAL (2008 Sequoia)+

6. REMOVE REAR SIDE NO. 1 AIR DUCT (for RH Side) HEATING / AIR CONDITIONING: REAR AIR CONDITIONING UNIT: REMOVAL (2008 Sequoia)+

7. REMOVE QUARTER SIDE SPEAKER ASSEMBLY (for RH Side) AUDIO / VIDEO: LUGGAGE SPEAKER: REMOVAL (2008 Sequoia)+

8. REMOVE REAR SEAT SHOULDER BELT GUIDE

(a) Remove the 2 bolts and rear seat shoulder belt guide.

9. REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH

(a) Remove the nut and shoulder anchor.

(b) Remove the 2 bolts and rear No. 2 seat outer belt assembly.

10. REMOVE REAR ROOF NO. 1 AIR DUCT (for RH Side)

(a) Remove the 3 clips and rear roof No. 1 air duct.

11. REMOVE REAR SEAT OUTER BELT ANCHOR BRACKET ASSEMBLY RH

(a) Remove the 2 bolts and rear seat outer belt anchor bracket assembly.